|
EDCS Reference Manual
EDCS Attribute Dictionary - Concepts whose label begin with the letter G |
|---|
EDCS Attribute Symbolic Constant: EAC_GATE_TYPE
EDCS Attribute Code: 344
Definition:
The type of a <GATE>.
EDCS Attribute Value Data Type: ENUMERATION
| Code | Label | Symbolic constant | Definition | Reference type | References |
| 1 | CROSSING | EEC_GATETY_CROSSING | Controlled access to a rail or road intersection. | NR | |
| 2 | RESTRICTED_ACCESS | EEC_GATETY_RESTRICTED_ACCESS | Controlled access to a restricted site or region. | NR | |
| 3 | TOLL | EEC_GATETY_TOLL | Controlled access to a use-for-fee roadway. | NR | |
Reference Type: NR
References: none
EDCS Attribute Symbolic Constant: EAC_GAUGE_WIDTH
EDCS Attribute Code: 345
Definition:
The width of a single pair of rails of a <RAILROAD_TRACK>, measured along the shortest distance from inside rail to inside rail; the guage width.
EDCS Attribute Value Data Type: REAL
EDCS Unit Equivalence Class Label: LENGTH
EDCS Group Labels: DIMENSION, LAND_TRNSP
Reference Type: NR
References: none
EDCS Attribute Symbolic Constant: EAC_GENERAL_DAMAGE_FRACTION
EDCS Attribute Code: 346
Definition:
The extent of physical injury/damage to an <OBJECT> in terms of fractional degradation from a healthy state. The value may be interpreted as follows: 1/4: Slight Injury/Damage, 2/4: Moderate Injury/Damage, 3/4: Heavy Injury/Damage, 4/4: Fatally Injured or Completely Destroyed.
EDCS Attribute Value Data Type: REAL
EDCS Unit Equivalence Class Label: PURE_NUMBER
EDCS Group Labels: RATE_OR_RATIO
Reference Type: NR
References: none
EDCS Attribute Symbolic Constant: EAC_GEODETIC_AZIMUTH
EDCS Attribute Code: 347
Definition:
The <<VECTOR_AZIMUTH_GEODETIC>> in the horizontal plane at the observer's location, to either a line passing through the observer, or a vector relative to the observer, or the direction from the observer to an <OBJECT> or <LOCATION>.
EDCS Attribute Value Data Type: REAL
EDCS Unit Equivalence Class Label: PLANE_ANGLE
EDCS Group Labels: ANGULAR_MEASURE
Reference Type: NR
References: none
EDCS Attribute Symbolic Constant: EAC_GEOGRAPHIC_LIGHT_RANGE
EDCS Attribute Code: 348
Definition:
The maximum distance at which the curvature of the <PLANETARY_SURFACE> and <ATMOSPHERE> refraction permit a <LIGHT> to be seen from a particular height of eye without regard to the luminous intensity of the <LIGHT>; geographic light range.
EDCS Attribute Value Data Type: REAL
EDCS Unit Equivalence Class Label: LENGTH
EDCS Group Labels: DIMENSION, LIGHTING_AND_VISIBILITY
Reference Type: IR
References: [BOWD]
EDCS Attribute Symbolic Constant: EAC_GEOGRAPHIC_REGION
EDCS Attribute Code: 349
Definition:
The general geographic <LOCATION> of an <OBJECT>, characterized by <REGION>.
EDCS Attribute Value Data Type: ENUMERATION
| Code | Label | Symbolic constant | Definition | Reference type | References |
| 1 | AFRICA | EEC_GEOREGN_AFRICA | Africa. | NR | |
| 2 | ANTARCTIC | EEC_GEOREGN_ANTARCTIC | Antartic. | NR | |
| 3 | ARCTIC | EEC_GEOREGN_ARCTIC | Arctic. | NR | |
| 4 | ASIA | EEC_GEOREGN_ASIA | Asia. | NR | |
| 5 | EUROPE | EEC_GEOREGN_EUROPE | Europe. | NR | |
| 6 | NORTH_AMERICA | EEC_GEOREGN_NORTH_AMERICA | North America. | NR | |
| 7 | OCEANIA | EEC_GEOREGN_OCEANIA | Oceania. | NR | |
| 8 | SOUTH_AMERICA | EEC_GEOREGN_SOUTH_AMERICA | South America. | NR | |
Reference Type: NR
References: none
EDCS Attribute Symbolic Constant: EAC_GEOMORPHIC_DEPTH
EDCS Attribute Code: 350
Definition:
The depth of an <OBJECT> below mean <SURFACE> level as determined by a corresponding digital elevation matrix; if not obtainable, the mean depth is used; the geomorphic depth.
EDCS Attribute Value Data Type: REAL
EDCS Unit Equivalence Class Label: LENGTH
EDCS Group Labels: DIMENSION, PHYSIOGRAPHY, POSITION
Reference Type: NR
References: none
EDCS Attribute Symbolic Constant: EAC_GEOMORPHIC_HEIGHT
EDCS Attribute Code: 351
Definition:
The height of an <OBJECT> above mean <SURFACE> level as determined by a corresponding digital elevation matrix; the geomorphic height.
EDCS Attribute Value Data Type: REAL
EDCS Unit Equivalence Class Label: LENGTH
EDCS Group Labels: DIMENSION, PHYSIOGRAPHY, POSITION
Reference Type: NR
References: none
EDCS Attribute Symbolic Constant: EAC_GEOPOTENTIAL_ALTITUDE
EDCS Attribute Code: 352
Definition:
The altitude of a point in the <ATMOSPHERE> expressed into the geopotential at that altitude.
EDCS Attribute Value Data Type: REAL
EDCS Unit Equivalence Class Label: GEOPOTENTIAL_ENERGY_LENGTH
EDCS Group Labels: ATMOSPHERE, POSITION
Reference Type: NR
References: none
EDCS Attribute Symbolic Constant: EAC_GLIDE_SLOPE_ANGLE
EDCS Attribute Code: 353
Definition:
The vertical angle at which an <AIRCRAFT> should properly descend to a touchdown point; the glide slope angle.
EDCS Attribute Value Data Type: REAL
EDCS Unit Equivalence Class Label: PLANE_ANGLE
EDCS Group Labels: AIR_TRNSP, ANGULAR_MEASURE
Reference Type: IR
References: [FACC, Annex B: GSA]
EDCS Attribute Symbolic Constant: EAC_GLINT_ANGLE
EDCS Attribute Code: 354
Definition:
The angle subtended by the glint vector and the <SURFACE> normal, where the glint vector is the vector that bisects the source vector and the viewing vector at a <SURFACE>. Used by the Phong and Sandford-Robertson BRDF models.
EDCS Attribute Value Data Type: REAL
EDCS Unit Equivalence Class Label: PLANE_ANGLE
EDCS Group Labels: ABSTRACT_CONCEPT, ALGORITHM_RELATED, ANGULAR_MEASURE, EM_PHENOMENON, LIGHTING_AND_VISIBILITY
Reference Type: IR
References: [WATT]
EDCS Attribute Symbolic Constant: EAC_GRADING_TYPE
EDCS Attribute Code: 355
Definition:
Identifies the type/number of <OBJECT> sides for which the local terrain has been graded, e.g., as a cut or an <EMBANKMENT>.
EDCS Attribute Value Data Type: ENUMERATION
| Code | Label | Symbolic constant | Definition | Reference type | References |
| 1 | NO_SIDES | EEC_GRDTY_NO_SIDES | No sides of the object have either a cut or an embankment. | NR | |
| 2 | ONE_SIDE | EEC_GRDTY_ONE_SIDE | Only one side of the object has either a cut or an embankment. | NR | |
| 3 | TWO_SIDES | EEC_GRDTY_TWO_SIDES | Two sides of the object have either a cut or an embankment. | NR | |
| 4 | MORE_THAN_TWO_SIDES | EEC_GRDTY_MORE_THAN_TWO_SIDES | More than two sides of the object have either a cut or an embankment. | NR | |
Reference Type: NR
References: none
EDCS Attribute Symbolic Constant: EAC_GRID_DIAGONALIZATION
EDCS Attribute Code: 356
Definition:
The direction along which a grid cell formed by four adjacent data values is divided into two triangular facets along a cell diagonal.
EDCS Attribute Value Data Type: ENUMERATION
| Code | Label | Symbolic constant | Definition | Reference type | References |
| 1 | LOWERLEFT_UPPERRIGHT | EEC_GRIDDIAG_LOWERLEFT_UPPERRIGHT | Lower-left to/from upper-right. | NR | |
| 2 | UPPERLEFT_LOWERRIGHT | EEC_GRIDDIAG_UPPERLEFT_LOWERRIGHT | Upper-left to/from lower-right. | NR | |
Reference Type: NR
References: none
EDCS Attribute Symbolic Constant: EAC_GTRS_GEOTILE
EDCS Attribute Code: 357
Definition:
The identification of a specific geotile within the Geotile Reference System, by a 6-digit alphanumeric designation: the first two letters are the encompassing GTRS megatile, the next two digits are the Easting index of the geotile within the megatile, and the last two digits are the Northing index of the geotile within the megatile.
EDCS Attribute Value Data Type: STRING
EDCS Group Labels: POSITION
Reference Type: IR
References: [GTRS]
EDCS Attribute Symbolic Constant: EAC_GUIDED_MISSILE_DESTROYER_TYPE
EDCS Attribute Code: 358
Definition:
The type of a <GUIDED_MISSILE_DESTROYER>.
EDCS Attribute Value Data Type: ENUMERATION
| Code | Label | Symbolic constant | Definition | Reference type | References |
| 1 | MANCHESTER_CLASS_TYPE_42 | EEC_GDEMSSLDSTTY_MANCHESTER_CLASS_TYPE_42 | The Manchester class Type 42 design; approximate dimensions: 125 by 14 metres. | IR | [WNT1] |
| 2 | SHEFFIELD_CLASS_TYPE_42_BATCH_1 | EEC_GDEMSSLDSTTY_SHEFFIELD_CLASS_TYPE_42_BATCH_1 | The Sheffield class Type 42 design, Batch 1; approximate dimensions: 125 by 14 metres. | NR | |
Reference Type: NR
References: none
EDCS Attribute Symbolic Constant: EAC_GUIDED_MISSILE_FRIGATE_TYPE
EDCS Attribute Code: 359
Definition:
The type of a <GUIDED_MISSILE_FRIGATE>.
EDCS Attribute Value Data Type: ENUMERATION
| Code | Label | Symbolic constant | Definition | Reference type | References |
| 1 | BROADSWORD_BOXER_TYPE_22_CLASS | EEC_GDEMSSLFRIGTY_BROADSWORD_BOXER_TYPE_22_CLASS | The Broadsword class Type 22 design, Boxer class; approximate dimensions: 148 by 15 metres. | NR | |
| 2 | BROADSWORD_CORNWALL_TYPE_22_CLASS | EEC_GDEMSSLFRIGTY_BROADSWORD_CORNWALL_TYPE_22_CLASS | The Broadsword class Type 22 design, Cornwall class; approximate dimensions: 148 by 15 metres. | NR | |
| 3 | DUKE_CLASS_TYPE_23 | EEC_GDEMSSLFRIGTY_DUKE_CLASS_TYPE_23 | The Duke class Type 23 multi-purpose; approximate dimensions: 133 by 16 metres. | IR | [WNT1] |
| 4 | NANUCHKA_I_CLASS_CORVETTE | EEC_GDEMSSLFRIGTY_NANUCHKA_I_CLASS_CORVETTE | The Nanuchka I class corvette; approximate dimensions: 59 by 12 metres. | NR | |
| 5 | NANUCHKA_III_CLASS_CORVETTE | EEC_GDEMSSLFRIGTY_NANUCHKA_III_CLASS_CORVETTE | The Nanuchka III class small corvette. | NR | |
| 6 | NANUCHKA_IV_CLASS_CORVETTE | EEC_GDEMSSLFRIGTY_NANUCHKA_IV_CLASS_CORVETTE | The Nanuchka IV class corvette ,slightly modified from the Nanuchka III class; approximate dimensions: 59 by 12 metres. | IR | [WNT2] |
Reference Type: NR
References: none
EDCS Attribute Symbolic Constant: EAC_GUYED
EDCS Attribute Code: 360
Definition:
Indication that an <OBJECT> has support <WIRE>s (guys).
EDCS Attribute Value Data Type: LOGICAL
EDCS Group Labels: COMMUNICATION, INFRASTRUCTURE, LAND_INDUSTRY
Reference Type: NR
References: none
|